Adding A Hard Disk (120 Gb Model Only); Other - Sanyo DSR-M800 Instruction Manual

e_dsr_m800.book Page 43 Friday, January 31, 2003 5:45 PM
9 INITIALIZE/ADD HDD

Adding a hard disk (120 GB model only)

To add a hard disk, contact a Sanyo service center. When
adding a hard disk, use an add-on type hard disk unit (sold
separately).
[Setting conditions]
After adding a hard disk, be sure to initialize it. Note that
both hard disks will be initialized, and any data on the
original hard disk will be erased.
Hard disk setting screen
Mirroring: After adding a hard disk, you can record the
same image on both hard disks. If an image write error
occurs on one disk, you can still read the image from
the other.
Playback disk: When mirroring is set, the digital video
recorder automatically sets which of the two hard disks
to read the recorded image from.
43