Chapter 2 - Configure Network Settings; Configure The Settings For Your Network - Honeywell IF2 User Manual

CHAPTER
2
CONFIGURE NETWORK SETTINGS
This chapter describes how to configure network settings for the IF2 and includes
these topics:
•

Configure the Settings for Your Network

• Configure Security
• Manage Certificates
This chapter assumes that you are familiar with your network, networking terms,
and the type of security implemented by your network.
Configure the Settings for Your Network
You use the web browser interface to configure network settings. For more infor-
mation on using the web browser, see
This chapter explains how to use the web browser interface to configure settings
for:
• wired Ethernet connections. For help, see the next section,
Settings."
• parameters common to the wired connections, such as DNS addresses and time
servers. For help, see
• network security, such as passwords and access methods. For help, see
"Configure Security" on page
• certificates. For help, see
From a device management standpoint, there are several other methods you can
use to configure network settings, including the web browsers and the Device Con-
figuration web service. For more information on using these methods to configure
the IF2, see Chapter 5
IF2 Network Reader User Guide
"Use the Web Browser Interface" on page
"Configure Common Network Settings" on page
16.
"Manage Certificates" on page
"Manage, Troubleshoot, and Upgrade the IF2."
7.
"Configure Ethernet
15.
21.
13