Tag Types; Read Tries; Write Tries; Lock Tries - Honeywell IF2 User Manual

Tag Types

Check the appropriate check boxes to enable RFID operations for these kinds of
tags:
•
•
•
•
This setting is equivalent to the TAGTYPE BRI attribute.

Read Tries

Sets the maximum number of times the read algorithm is executed before a
response is returned to a Read command.
In practice, this is the number of times an identified tag is read until the Read is
successful. Valid range is 1 to 254 (default is 3).
This setting is equivalent to the RDTRIES BRI attribute.

Write Tries

Sets the maximum number of times the write algorithm is executed before a
response is returned to a Write command.
In practice, this is the number of times an identified tag is written to until the Write
is successful. Valid range is 1 to 254 (default is 3).
This setting is equivalent to the WRTRIES BRI attribute.

Lock Tries

Sets the maximum number of times the lock algorithm is executed before a
response is returned to a Lock command. Valid range is 1 to 254 (default is 3).
This setting is equivalent to the LOCKTRIES BRI attribute.

Field Separator

Sets the character to be used for separating fields in tag data. Choose from space
( ), comma (,), colon (:), semicolon (;), tab, caret (^), or tilde (~). Default is space.
This setting is equivalent to the FIELDSEP BRI attribute.

ID Report

Enables or disables tag ID reporting after a Read, Write, or Lock command is exe-
cuted:
•
28
EPC Class 1 Gen 2 (default)
Phillips v1.19
ISO6B/G1
ISO6B/G2
For ISO tags, the tag identifier corresponds to TAGID.
IF2 Network Reader User Guide