Disable Access Through The Serial Port; Manage Certificates; View Certificates - Honeywell IF2 User Manual

Disable Access Through the Serial Port

When serial port access is disabled, you also disable USB access. When you disable
access, you will not be able to configure the IF2 as described in
Address" on page
SmartSystems Console, or Device Configuration Web Service application) for all
configuration.
Note: USB is not supported on the IF2 with Expanded Memory Option.
1. From the menu, click Security > Passwords. The Passwords screen appears.
2. Clear the Enable Serial Configuration check box.
3. Click Activate Changes to save your changes and immediately make them

Manage Certificates

The default server certificate on the IF2 (ValidForHTTPSOnly) provides support for
secure network applications such as the secure web browser interface, secure
LLRP client connections, and secure web services. You can use a third-party certif-
icate authority to issue unique client certificates and a root certificate.
Note: To install or uninstall certificates, you need to access the IF2 via a secure web browser.
For help, see

View Certificates

You can use the web browser interface to view the certificates loaded on the IF2.
•
IF2 Network Reader User Guide
5. You must use a network application (such as a web browser,
active.
"Use the Web Browser Interface" on page
From the menu, click Security > Certificate Details. The Certificate Details
screen appears.
"Assign an Initial IP
7.
21