About The Ready-To-Work Indicator; About The Network And Power Ports - Honeywell IF2 User Manual

Icon

About the Ready-to-Work Indicator

The blue Ready-to-Work indicator shows when an application is communicating
with the Basic Reader Interface (BRI) server or LLRP client on the IF2. The next
table explains the different states of the Ready-to-Work indicator.
Ready-to-Work Indicator Status Descriptions
Status
Off
Blinking
Steady
For more information on the BRI server, see

About the Network and Power Ports

The IF2 network and power ports are located under the cable cover.
GPIO port
IF2 Network and Power Ports
IF2 Port Descriptions
Port
GPIO
IF2 Network Reader User Guide
Name Description
• Green if RF power is being transmitted.
RFID status
• Red if an antenna fault is detected, or if the reader cannot output the
requested RF power level.
• Off if RF power is off.
Tag ID Flashes when an RFID tag ID is successfully read or written to.
Description
IF2 does not have power.
IF2 is initializing and not yet ready to use, or no application is currently communicating
with the IF2 BRI or LLRP server or LLRP server.
An application is communicating with the BRI server or an LLRP client has connected
to the IF2.
DC power port
Description
General purpose input/output (GPIO) port that connects the IF2 to industrial
controls such as relays or indicators.
For more information on the IF2 GPIO interfaces, see
Interfaces" on page
"Configure the BRI Server" on page
COM 1
Ethernet port
(high power POE)
55.
31.
"About the GPIO
3