Multi-Handset Features; Using The Walkie-Talkie Mode (Clt-D5882/Clt-D5883 Only) - Sanyo CLT-D5880 Instruction Manual

UP800DH(CLT-D5880) OM
MULTI-HANDSET
The features in this section require a minimum of two handsets to operate.
Using the Walkie-Talkie Mode
To use this feature, you must enter the handsets into Walkie-Talkie mode first.
To enter Walkie-Talkie mode, see page E15.
Walkie-Talkie call
1
When the phone is in the Walkie-Talkie standby
mode, press the DirectLink soft key (example of
Walkie-Talkie from handset #1).
2
Select the handset to which you wish to Walkie-
Talkie with by pressing the number keys (0-9).
Your handset will then page the other handset.
3
On the receiving handset, press TALK/FLASH, the
ANSWER soft key, or if Anykey Answer is on, press
any number key,
4
When you finish your conversation, press END or the END soft key on
either handset. Return the handset to the cradle, or press the CANCEL soft
key and then the OK soft key to return to normal standby mode
(cancelling Walkie-Talkie mode).
Notes:
• Handsets can be in Walkie-Talkie mode while other handsets are in use.
• While a handset is in a Walkie-talkie mode, it cannot be used to make or receive a call.
Other handsets can still make or receive a call.
E46
1/24/06 3:39 PM Page 46
FEATURES
/TONE/ , or #/
.