3-Way Conferencing; Intercom/Call Transfer Feature - Sanyo CLT-D5880 Instruction Manual

5.8-ghz cordless telephone with caller id & visual call waiting
Table of Contents

Advertisement

UP800DH(CLT-D5880) OM
MULTI-HANDSET

3-Way Conferencing

The phone permits 3-way conversations between 2 handsets and an outside line.
1
Initiate the call normally. Once the call is in progress, other people can
join the call.
2
To join a conference call, press TALK/FLASH or SPEAKER on the other
handset.
3
To leave a conference call, simply hang up as you normally would.
All other parties will remain connected.
4
To end a conference call completely, all local parties must hang up.
The conference call will also end when the calling party hang up.
Note:
• If the initial handset is in privacy mode, other handsets cannot join the call.

Intercom/Call Transfer Feature

If you have two or more handsets, you can use them as an intercom.
Also, you can place an outside call on hold and transfer the call to another handset.
Intercom
1
In standby mode, press INTCM/HOLD.
2
Select the handset you want to talk with within 30
seconds. To select the handset, press VOL/
VOL/ , and then press the OK soft key. If you select
All, all other handsets will be paged. An intercom tone sounds.
To cancel intercom, press the CANCEL soft key on the initiating handset.
3
To answer the page, press TALK/FLASH,
INTCM/HOLD, or the ANSWER soft key. If Anykey
Answer is enabled, pressing a number key,
/TONE/
, or #/
If Automatic Talk is enabled, you can answer the page by simply picking
up the handset.
4
To hang up the intercom call, press END or the END soft key on either handset.
1/24/06
3:39 PM
Page 47
FEATURES
will answer the page.
or
E47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clt-d5883Clt-d5882

Table of Contents