Charging The Handset Baitery - Sanyo CLT-9670 Instruction Manual

Charging the handset battery
The BAIT. LOW indicator will flash when the handset needs recharging. Simply place
the handset in the base station cradle or the charger and charge it for 10 hours. It is
not necessary to turn the POWER switch off after initial charging.
Note
The handset battery can be recharged and reused many times.
Repeated recharging for a shorter period may reduce the battery time.
If the handset battery fails (the BAIT. LOW indicator flashes) even after being
charged for 10 hours, replace it with a new Sanyo cordless telephone battery,
type 3N-270AA (See page 20).
I
#
AITENTION
Securitv Code Setting
Your cordless telephone is shipped from the factory as a matched pair
(handset and base station). Before using the phone check'that the serial
number of the handset and base station are the same.
If the serial numbers of the handset and base station do not match or if your
handset does not work with your base station please refer to this Instruction
Manual page 22 for details of the Security Code setting before calling for service.
The Security Code must be set to match the handset to the base station for
correct operation.
7