Low Battery Alert; Cleaning The Battery Charging Contacts - Sanyo CLT-D5880 Instruction Manual

5.8-ghz cordless telephone with caller id & visual call waiting
Table of Contents

Advertisement

UP800DH(CLT-D5880) OM
GETTING

Low Battery Alert

When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not
in use, ¨
If the phone is in use, ¨
your conversation as quickly as possible and return the handset to the base
unit for charging.
Note:
• Even when the battery pack is not being used, it will gradually discharge over a long
period of time.

Cleaning the Battery Charging Contacts

To maintain a good charge, it is important
to clean the charging contacts on both the
handset and the base unit once a month.
Use a clean pencil eraser or superfine steel
wool. Avoid touching the cabinet area of
the phone or scratches may occur.
Caution: Do not use paint thinner, benzene,
alcohol, or other chemical products. Doing
so may discolor the surface of the
telephone and damage the finish.
Terminology
• Talk Mode -
The handset is off the base and the TALK/FLASH key has been pressed,
enabling a dial tone.
• Standby Mode -
The handset is not in use, off the base, and the TALK/FLASH key has not
been pressed. A dial tone is not present.
E6
1/24/06
3:37 PM
STARTED
¨ appears on the LCD and none of the keys will operate.
¨ flashes and the handset beeps. Complete
contacts
Page 6
contacts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clt-d5883Clt-d5882

Table of Contents