Sanyo CLT-D5880 Instruction Manual page 18

UP800DH(CLT-D5880) OM
USING
Room/Baby Monitor
This feature allows you to monitor
sounds in another room. Place a
handset in the room you wish to
monitor; it will function as a
microphone. A second handset
can be set to function as a remote
speaker, allowing you to monitor
sounds in the room.
Using Room/Baby Monitor
1
Press the MENU soft key and select the Room Monitor menu.
2
Select the handset you want to monitor by using VOL/
3
Press the OK soft key.
room where the handset is installed.
4
To turn off the Room Monitor, press the END soft key, or END.
Notes:
• This feature only works when the handset(s) is within the range of the base.
• You must have at least two handsets to use Room/Baby Monitor.
During room monitor, if you receive a call, you will hear beeps from the
earpiece or speaker. Press TALK/FLASH to answer the call.
E16
1/24/06 3:38 PM
THE INTERFACE
appears.
appears, and you hear sounds in the
Page 16
or VOL/ .