Mounting The Base Unit On A Wall - Sanyo CLT-D5880 Instruction Manual

UP800DH(CLT-D5880) OM
GETTING

Mounting the Base Unit On a Wall

Standard Wall Plate Mounting
This phone can be mounted on any standard wall plate.
1
Put the AC adapter and the
telephone line cord through the
hole on the wall mount adapter.
2
Plug the AC adapter into the
DC IN 9V jack.
3
Plug the telephone line cord into
the TEL LINE jack.
4
Slide the wall mount adapter into
the notches on the base.
5
Plug the AC adapter into a
standard 120V AC wall outlet.
Hook the cord on the notch of the
wall mount adapter.
6
Plug the telephone line cord into
the telephone outlet. Hook the
cord on the notch of the wall
mount adapter.
7
Align the mounting slots on the
base with the mounting posts on
the wall. Then push in and down
until the phone is firmly seated.
IMPORTANT
DO NOT use an AC outlet controlled by a wall switch.
1/24/06 3:38 PM Page 9
STARTED
To remove, push up
the tab on the wall
mount adapter as
shown.
E9