Changing The Handset Banner; Selecting A Ring Tone (Handset Only) - Sanyo CAS-D6325 Instruction Manual

GETTING
STARTED
1.
Press MENU/SELECT. Select the GLOBAL SETUP menu, and then the CID/PHBK MATCH
submenu.
2.
Move the cursor to select ON or OFF .
3.
Press MENU/SELECT. You will hear a confirmation tone.

Changing the Handset Banner

Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2,
etc. You can change the name your phone displays by changing the banner display. If you have more than one handset, the
banner name identifies your handset.
1.
Press MENU/SELECT. Select the HANDSET SETUP menu, and then the BANNER submenu.
2.
Use the keypad to enter or edit the banner name. ( See Entering Text from Your Handset on page E14 for detailed
instructions on entering text.)
3.
Press MENU/SELECT. You will hear a confirmation tone.
Note:
• When you have multiple bases and even if the handset ID is changed when you switch to a different base,
the handset will keep the banner name.

Selecting a Ring Tone (Handset only)

You may choose from four melodies or three tones for your
phone's primary ring tone. Each handset can use a different ring
tone or melody. The available ring tones are as listed:
UC590EH.indd E18 UC590EH.indd E18
Fur Elise (ELISE) Fur Elise (ELISE)
We Wish You A Merry We Wish You A Merry
Christmas (MERRY-XMAS) Christmas (MERRY-XMAS)
Melodies Melodies
Aura Lee (AURA LEE) Aura Lee (AURA LEE)
Star Spangled Banner Star Spangled Banner
(STAR SPNGL) (STAR SPNGL)
E18
Flicker Flicker
Tones Tones
Clatter Clatter
Wake Up Wake Up
8/19/2008 11:39:03 AM 8/19/2008 11:39:03 AM