Chain Dialing From The Directory; Changing The Battery - Sanyo CLT-U12 Instruction Manual

DIRECTORY
number is shown, or use the number pad to select a memory location. The
selected telephone number and name show on screen.
4. While the entry is displayed, press CH/DEL to delete the entry. The screen
shows "DELETE?"
5. Press CH/DEL again to delete the entry. "DELETED" shows on screen.

Chain dialing from the directory

Use this feature to make calls that require a sequence of numbers such as using
a calling card for a frequently called long distance number. You can dial each part
of the sequence from a different entry of the directory. The following example
shows how you can use chain dialing to make a call through a long distance
service:
The Number for:
Long distance access number
Authorization code
Frequently called long distance number
1. Make sure the phone is in TALK mode.
2. Press MEM and then press 7.
3. When you hear the access tone, press MEM and then press 8.
4. At the next access tone, press MEM and then 9.
Tip: Wait for the access tones before pressing the next memory key, or your
call might not go through.

CHANGING THE BATTERY

Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please
replace the battery.
With normal usage, your battery should last about one year.
For a replacement battery, please contact your place of purchase or fill out and
mail the enclosed form.
Caution:
• Use only the specified battery type (3.6V, 600mAh).
Memory Location
7
8
9
21