MicroNet SP916NE Quick Installation Manual

Note: Two kinds of fast access methods are provided on the
router's web-based utility: ADSL dial-up and DHCP .
2. If you select ADSL dial-up, you only need to enter the access
2. account and access password as well as the wireless password,
2. and then click "Ok" to complete the settings.
Micronet
*********
3. If you select DHCP, you only need to enter the wireless
2. password and click "Ok" to complete the settings.
Search the AP router through Wireless network
1. On the PC site, disable the LAN adapter and enable the
1. wireless adapter.
2. Use the adapter's utility to browse the wireless network
1. in neighborhood.
3. Find the AP router's name; click the item to open the
1. configuration page then key in the SSID that was set in the AP.
1. Save the setting then the PC can join the network of this AP.
4. Now, the PC can access Internet through this AP router.
5.For further settings of this AP router, please refer the manual
1. on the CD.
P/N 2300-0679
5
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
7
The default access method is ADSL dial-up and the access account
and access password are the same as the ADSL dial-up account
and password, which you can inquire your broadband ISP. For
other access methods, please refer to WAN settings in chapter
4.The wireless password can only consist of 8 characters, the
default is 12345678 and you can modify it when necessary.
Communicate via
Quick Installation Guide
300Mbps/150Mbps Wireless
LAN Broadband Router
Model No.: SP916NE/SP916NL
SP916NE
6
SP916NL
w w w . m i c r o n e t . c o m . t w