Table of Contents
Advertisement
Chapter 3. Operation
MENU ACCESS
To access the Modules menu and submenus, use the keyboard arrow keys to
scroll to the appropriate row and column; then press ENTER on the keyboard.
For example, to view the Menu submenus for T3-2 (as shown in Figure 3-1), use
the keyboard arrow keys to scroll down to Modules, right to T3-2, and right again
to the Menu column; then press ENTER.
T3 MODULE MENU DESCRIPTIONS
The following paragraphs (Slt (slot), Type, Menu, Alarm, Test, State, Status, and
Rev (revision)) describe the Modules menus and submenus. Unless a write secu-
rity-level is given, all menus and submenus are read-only.
Slt (slot)
Read security: 5
Displays the number of available option slots in the ATLAS 800 chassis. Slot 0
refers to the ATLAS 800 Base Unit.
Type
Write security: 3; Read security: 5
Displays the type of module currently installed in the slot or the module type you
plan to install in the slot. For instance, if a T3 Module is installed, the Type field
automatically defaults to T3-1 or T3-2. You can use this field to preconfigure a sys-
tem before installing modules; simply specify the module that you want to install
into each slot.
3-2
Figure 3-1. Modules Menu
Refer to the Atlas 800 User Manual for detailed instruction on navigating
through the terminal menu.
If a module is installed, Type automatically displays the name of the in-
stalled module, and it cannot be set to any other option.
T3 Module User Manual
61200223L1-1
Advertisement
Table of Contents
