Appendix A Dial Plan Interface Configuration; Figure A-1. Dial Plan Menus - ADTRAN T3 User Manual

Appendix A
INTERFACE CONFIGURATION
The interface configuration option for the Dial Plan menu sets configuration
parameters for the end point. These parameters vary by the type of port selected.
The following section describes the configuration options available for the T3-1
and T3-2 Modules. The Dial Plan menus are only accessible when using terminal
mode. To access these options, select Dial Plan from the top level menu (see Fig-
ure A-1).
T3 MODULE INTERFACE CONFIGURATION
This section describes the network termination and user termination configura-
tion settings for the T3-1 and T3-2 Modules when using the Dial Plan menus.
These menus represent the T3 Module as having 28 T1 ports to configure.
61200223L1-1
Dial Plan Interface Configuration
The Write security level for all Dial Plan options is 3.

Figure A-1. Dial Plan Menus

T3 Module User Manual A-1