Atlona OmniStream R-Type AT-OMNI-512 Installation Manual
  1. Manuals
  2. Brands
  3. Atlona Manuals
  4. Media Converter
  5. OmniStream AT-OMNI-512
  6. Installation manual

Atlona OmniStream R-Type AT-OMNI-512 Installation Manual

Dual-channel networked av encoder
Hide thumbs Also See for OmniStream R-Type AT-OMNI-512:
Table of Contents

Advertisement

Quick Links

Download this manual
OmniStream R-Type Dual-Channel Networked AV Encoder
AT-OMNI-512
The Atlona OmniStream™ R-Type (AT-OMNI-512) is a networked AV encoder with two
independent channels of encoding for two HDMI sources up to UHD @ 60 Hz and HDR, plus
embedded audio and RS-232 or IR control pass-through. It is part of the OmniStream R-Type
Series, designed for high performance, flexible distribution of AV over Gigabit Ethernet in
residential and light commercial applications. The OmniStream 512 is HDCP 2.2 compliant
and ideal for the latest as well as emerging UHD and HDR sources. It features visually lossless
compression with pristine-quality video and graphics performance, plus extremely low, sub-
frame latency from encode to decode – critical for demanding applications such as gaming.
This dual-channel encoder is housed in a half-width rack enclosure and is ideal for high-density,
compact installation in a centralized equipment location.

Package Contents

1 x AT-OMNI-512
1 x Push spring connector, 6-pin
1 x Wall/table mounting brackets
4 x Rubber feet
1 x Installation Guide
Operating Notes
•
OmniStream R-Type uses mDNS as the discovery mechanism. In order for mDNS to
function properly, there must not be restrictions applied to the network.
IMPORTANT: Visit http://www.atlona.com/product/AT-OMNI-512 for the latest
firmware updates and User Manual.
1

Installation Guide

AT-OMNI-512

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniStream R-Type AT-OMNI-512 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Atlona OmniStream R-Type AT-OMNI-512

Summary of Contents for Atlona OmniStream R-Type AT-OMNI-512

  • Page 1: Installation Guide

    OmniStream R-Type Dual-Channel Networked AV Encoder AT-OMNI-512 The Atlona OmniStream™ R-Type (AT-OMNI-512) is a networked AV encoder with two independent channels of encoding for two HDMI sources up to UHD @ 60 Hz and HDR, plus embedded audio and RS-232 or IR control pass-through. It is part of the OmniStream R-Type Series, designed for high performance, flexible distribution of AV over Gigabit Ethernet in residential and light commercial applications.

  • Page 2: Panel Descriptions

    Installation Guide AT-OMNI-512 Panel Descriptions HDMI LINK HDMI LINK TREAM TREAM RX TX RX TX HDMI IN ETHERNET RS-232 / IR DC 48V HDMI IN ETHERNET RS-232 / IR DC 48V AT-OMNI-512 AT-OMNI-512 HDMI 1 / HDMI 2 This LED indicator is green when the unit Connect HDMI cables from these ports to is powered.
  • Page 3 Installation Guide AT-OMNI-512 RS-232 The AT-OMNI-512 provides RS-232 over IP which allows communication between an automation system and an RS-232 device. This step is optional. Either the top three or bottom three set of terminals can be used for RS-232. Use wire strippers to remove a portion of the cable jacket.

  • Page 4: Installation

    Installation Guide AT-OMNI-512 Installation Connect an Ethernet cable from the ETHERNET 1 and ETHERNET 2 ports on the encoder to a PoE-capable switch on the Local Area Network (LAN). Note that if a PoE-capable switch is not available, the 48V DC power supply (sold separately) must be connected to the encoder.

  • Page 5: Connection Diagram

    Installation Guide AT-OMNI-512 Enter the desired static IP address or the IP address provided by the network administrator. If the PC does not require Internet access or if a statically-assigned IP address is being used, then an IP address of 169.254.xxx.xxx can be entered. 10.

  • Page 6: Mounting Instructions

    Installation Guide AT-OMNI-512 Mounting Instructions The AT-OMNI-512 encoder includes two Repeat steps 1 through 4 to attach the mounting brackets and four mounting screws, second mounting bracket to the opposite which can be used to attach the unit to any flat side of the unit.

  • Page 7: Troubleshooting

    Check the Ethernet cable for possible damage or loose connections. • Connect the optional 48V DC power supply (available from atlona.com) to the encoder. When using an external power supply, the PWR indicator will be red. LINK indicator is red. •...
  • Page 8 • © 2017 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and...

Table of Contents