2.2.7
Activating Modules (for module swapping)
Procedure
IM 04L51B01-05EN
If you replace a module with another module (same type) after system reconfiguration, you
need to activate the module or else the measured data will result in errors. If the identified
module is different from the actual module, you can activate the module from the System
information screen.
Only administrators and users with system operation privileges can perform this operation.
1.
Press MENU.
The menu screen appears.
2.
Tap the Browse tab and then System information.
The system information screen appears.
3.
Tap Activate module.
The module will be activated.
Operation complete
Note
Be sure to turn off the power when removing or inserting modules. Removing or inserting modules
with the power turned on may lead to malfunction.
2.2 Registering Users and Setting the Signature Method
Icon that indicates that the module
needs to be activated
Module Activation
This becomes available when the
module needs to be activated.
1
2
3
App
2-13