Manual Sampled Data; Report Data (/Mt Option) - YOKOGAWA GX10 User Manual

1.2.5

Manual Sampled Data

1.2.6

Report Data (/MT option)

IM 04L51B01-05EN
Recording Conditions of Event Data
Item
Channel type
Recording interval
File generation
Mode
Creating Files through Touch Operation
You can use touch operations to generate files.
File File
Saved the previous time
For operating instructions, see section 2.5.6, "Saving Display Data or Event Data during
Recording through Touch Operation" in the User's Manual (IM04L51B01-01EN).
Manual sampled data is recorded to internal memory. If the number of manual sampled data
entries exceeds 400, the data is overwritten from the oldest entry.
For operating instructions, see section 2.5.3, "Manually Saving Instantaneous Values of
Measured Data (Manual sample)" in the User's Manual.
Report data is saved to the internal memory. If the number of report data entries exceeds
800, the data is overwritten from the oldest entry.
For the setting procedure, see section 1.16, "Setting the Report Function (/MT option)" in
the User's Manual.
Description
Same as display data.
Choices are available in the range of 100 ms to 30 min. You cannot
choose a recording interval that is shorter than the scan interval.
A file is generated when the set data length is reached.
A file is also created in the following instances.
• When a file is created manually
• When recording is stopped
• When file creation is executed with the event action function
• After recovering from a power failure
Free (always recording)
You can start or stop recording on the menu screen or using the
START/STOP key.
For operating instructions, see section 2.1, "Starting and Stopping
Recording and Computation" in the User's Manual.
File File
Save operation
Time
File
Saved this time
Time
Manual sampled data
Time
Report data
1.2 Recording and Saving Data
Time
File Adding data
1
2
3
App
1-7