Centurion SD04 Installation Manual page 37

6.2.2.4. Mounting the towing bracket to the garage door.
Close the garage door, and find its
center line.
Center the towing bracket on the
garage door center line and so that
the top edge of the towing bracket
is as close to the top edge of the
garage door as possible.
Place a small spirit level on
the top edge of the towing
bracket, to ensure that it is
level when drilling holes.
Secure the towing bracket into
position using the three hexagonal
head self-tapping screws supplied.
If the garage door is heavier
than average, more screws
can be used to fix the
bracket to the garage door.
Ensure that the length of
the screws do not exceed
the depth of the garage
door.
The above method is for
the purpose of wooden
garage doors. Should you
have a garage door that is
not constructed from wood,
such as a steel garage door,
we recommend the use
of TEK® screws to secure
the towing bracket to the
garage door.
www.centsys.com
SDO4
Garage door
Towing bracket
page 37
Garage door
Garage door
center line
FIGURE 67
Towing bracket
Garage door
center line
FIGURE 68
Top edge of
garage door
Hex head Self-
tapping screw
FIGURE 69