Festo CPX-FB13 Manual page 48

2. Commissioning
Electric modules
Description
CPX−CP interface:
CPX−CP−4−FB
Soft−stop end−position
controller: CPX−CMPX
Multi−axis interface:
CPX−CMXX
1)
Module identifier in the handheld unit or in the hardware configuration of the programming software
2)
Dependent on the last CP string used, example for maximum assignment
Tab. 2/4: Module overview and address assignment part 4: Technology modules
Operating mode
Remote Controller
Electric modules
Description
Field bus node
(Remote controller)
(FB13: CPX−8 bytes I/8 bytes O)
1)
Module identifier in the handheld unit or in the hardware configuration of the programming software
Tab. 2/5: Configuration of the field bus node for the operating mode Remote Controller
2−8
Module Identifier
1)
identifier Siemens/EN 50170
CPI 192 / C0
CMPX−C−1−H1 53
CPX−CMXX 192 / C0
In the Remote Controller operating mode, only the identifier
of the field bus node will be configured (see section 2.1.5):
Module Identifier
1)
identifier Siemens/EN 50170
FB13−RC 192 / C0
Assigned address
space
Inputs
2)
, 0F , 0F max. 4
h h h
bytes per
string/
128 I
/ 35 3 words/
h
48 I
, 0F , 0F 16 byte/
h h h
128 I
Assigned address
space
Inputs
, 07 , 07 8 byte/
h h h
64 I
Festo P.BE−CPX−FB13−EN en 0811c
Outputs
max. 4
bytes per
string/
128 O
3 words/
48 O
16 byte/
128 O
Outputs
8 byte/
64 O