MTU 16V2000M72 Operating Instructions Manual page 151

8.16.8 Coolant filter – Replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Oil filter wrench
Coolant filter
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
Replacing coolant filter
1. Turn breather valve of coolant expansion tank
counterclockwise (→ Page 26) to the first
stop and allow pressure to escape.
2. Continue to turn breather valve counterclock-
wise and remove.
3. Remove coolant filter using the oil filter
wrench.
4. Clean the sealing face on the adapter.
5. Coat sealing ring of the new coolant filter
with engine oil.
6. Install and tighten coolant filter by hand.
7. Close breather valve.
8. Check coolant level (→ Page 145).
M015650/06E 2018-05 | Coolant Circuit, General, High-Temperature Circuit | 151
Part No.
F30379104
(→ Spare Parts Catalog)
Qty.
1