Electrolux EXI09HJIW User Manual page 9

for switching on the unit. If the TIMER
ON symbol " " blinks, press the UP
or DOWN button to set the time. Keep
the button pressed for two seconds to
accelerate the process. Press the button
to set the timer. Default setting: 8:00
cancel the timer function.
TIMER OFF BUTTON
Press the button to set the timer function
for switching on the unit. If the TIMER
ON symbol " " blinks, press the UP
or DOWN button to set the time. Keep
the button pressed for two seconds to
accelerate the process. Press the button
to set the timer. Default setting: 8:00
cancel the timer function.
I FEEL BUTTON
Press the button to enable or disable the
I FEEL function. If the I FEEL function is
enabled, the I FEEL symbol "
shown.
If the I FEEL symbol is enabled, the remote
control will send the ambient temperature
to the main unit every 10 minutes or when
you press one of the buttons.
FAN SPEED BUTTON
Press the button to set the fan speed:
AUTO, LOW, MEDIUM and HIGH. Default
setting: AUTO. In the DRY mode, only
LOW can be set.
AUTO LOW MEDIUM
TURBO BUTTON
In COOL or HEAT mode, press the button
to enable or disable the turbo function. If
the turbo function is enabled, the turbo
symbol " " will be shown.
If the turbo function is enabled, the unit
will operate at turbo speed to cool or heat
rapidly so that the ambient temperature
approaches the set temperature as soon
as possible.
Press the button to set the clock. If the
clock symbol " " blinks, press the UP
or DOWN button to set the time. Keep
the button pressed for two seconds to
accelerate the process. Press the CLOCK
button again to set the clock. The clock
symbol stops blinking.
Press the button to enable or disable the
function is enabled, the HEALTH symbol
" " will be shown.
TEMP BUTTON
Press this button to change the remote
control display of the set temperature to
the Room or Outside temperature.
See Room temperature, the symbol
" " will be shown.
See Outside temperature, the symbol
" " will be shown.
LIGHT BUTTON
Press the button to switch the display
of the indoor unit on or off. When switch
on, the light symbol "
" will be Default setting: OFF.
In COOL or DRY mode, press the button
to enable or disable the X-FAN function.
If the X-FAN function is enabled, the
X-FAN symbol "
setting: OFF.
REPELLENT BUTTON
In COOL or DRY mode, press the button
to enable or disable the Repellent function.
If the Repellent function is enabled, the
Repellent symbol "
HIGH
Default setting: OFF.
ECO BUTTON
In COOL or DRY mode, press this button
to enable or disable Eco operation. If the
ECO function is enabled, the ECO symbol
" " will be shown. Default setting: OFF.
This is ideal for the users to use while
sleeping.
ENGLISH
" will be showed.
" will be shown. Default
" will be shown.
9