Electrolux EXI09HJIW User Manual page 24

24 www.electrolux.com
restarts in HEAT mode operation after
defrosting.
3. Low noise of the air conditioner
You may hear a low hissing sound
when the compressor is running or has
just stopped running. It is the sound of
stop.
sound when the compressor is running
or has just stopped running. This is
caused by heat expansion and cold
contraction of the plastic parts in the
unit when the temperature is changing.
A noise may be heard due to louver
restoring to its original position when
power is turned on.
4. Dust is blown out from the indoor
unit
This is a normal condition when the air
conditioner has not been used for a
5. A peculiar smell comes out from
the indoor unit
This is caused by the indoor unit giving
off smells permeated from building
material, from furniture, or smoke.
6. The air conditioner turns to FAN
only mode from COOL or HEAT
(For cooling and heating models
only) mode
When indoor temperature reaches the
temperature setting on air conditioner,
the compressor will stop automatically,
and the air conditioner turns to FAN
only mode. The compressor will start
again when the indoor temperature
rises on COOL mode or falls on HEAT
mode (For cooling and heating models
7. The air conditioner runs Anti-
mildew function after turning off the
unit.
When turning off the unit under
and DRY mode, the air conditioner
will run Anti-mildew function for
7-10 minutes, if turns off on HEAT
mode, the unit will continue operating
for about 30 seconds at LOW fan
speed, then stop the operation and turn
off the unit automatically.
Dripping water may generate on the
surface of the indoor unit when cooling
in a high relatively humidity (relative
horizontal louver to the maximum air
outlet position and select HIGH fan
speed.
8. Heating mode (For cooling and
heating models only)
The air conditioner draws in heat
from the outdoor unit and releases
it via the indoor unit during heating
operation. When the outdoor
temperature falls, heat drawn in by the
ai conditioner decreases accordingly.
At the same time, heat loading of
the air conditioner increases due to
larger difference between indoor and
outdoor temperature. If a comfortable
temperature can't be achieved by the
air conditioner, we suggest you use a
supplementary heating device.
9. Auto-restart function
Power failure during operation will stop
the unit completely.
For the unit without Auto-restart
feature, when the power restores, the
OPERATION indicator on the indoor
operation, push the ON/OFF button on
the remote controller. For the unit with
Auto-restart feature, when the power
restores, the unit restarts automatically
with all the previous settings preserved
by the memory function.