Table of Contents
Advertisement
Spare parts
10.4 Ordering spare parts via the Internet
10.4
Ordering spare parts via the Internet
See also
Guide for Spares on Web (https://www.weblogx.siemens.de/SoWHilfe_HS/motors/en/)
10.5
Replacing rolling bearings
Rolling bearings
When ordering rolling bearings, in addition to the bearing identification code, the
supplementary specifying code is also necessary for the bearing version. Both of these
codes are stamped on the lubricant plate and specified in the motor documentation, or can
also be taken from the installed bearings.
Always replace the rolling bearings with the identical bearings.
10.6
Insulated rolling bearings
If insulated rolling bearings are fitted, use insulated rolling bearings of the same type as
spare parts. This will prevent any bearing damage being caused by bearing currents.
10.7
Parts groups definition
A distinction is made between the following groups of parts:
Spare parts
Spare parts are machine parts that can be ordered during the production time - and for a
further 5 years after discontinuation of production. These parts should only be replaced by
authorized service or modification partners.
Repair parts
Repair parts are machine parts that can be supplied during the active production of the
machine (until the product discontinuation).
Repair parts are parts used for the repair or modification of the current products. These parts
should be replaced only by authorized service or modification partners.
118
You can use "Spares on Web" to determine the order numbers for motor
spare parts quickly and easily.
Spares on Web (https://www.sow.siemens.com/?lang=en).
Standard motors SH 63 ... 355
Operating Instructions, 12/2018, A5E38483075A
Advertisement
Table of Contents
