Table of Contents
Advertisement
Operation
8.1 Safety instructions for operation
Faults in operation
Any changes with respect to the normal condition can indicate that the machine is not
functioning correctly.
● Higher power consumption, temperatures or vibration levels.
● Unusual noise or smells.
● Monitoring devices respond.
These changes can cause faults which can result in eventual or immediate death, serious
injury or material damage.
● Immediately inform the service personnel.
● If you are in doubt, immediately switch off the machine, carefully observing the system-
specific safety conditions.
Damage caused by condensation
Humidity in the air can condense for intermittent duty or load fluctuations. Condensate can
collect. Moisture can have a negative impact on the winding insulation or result in damage,
such as corrosion.
● Ensure that any condensation can freely flow away.
Risk of burn injuries as a result of hot surfaces
Individual machine parts can become hot in operation. Burns can result when coming into
contact with these parts.
● Never touch machine parts during operation.
● Allow the machine to cool down before starting work.
● Check the temperature of parts before touching them. If required, wear suitable protective
equipment.
Hazardous substances
Chemical substances required for the setup, operation and maintenance of machines can
present a health risk. Poisoning, skin damage, cauterization of the respiratory tract, and
other health damage may result.
● Read the information in these operating instructions and the product information supplied
by the manufacturer.
● Observe the relevant safety regulations and wear the personal protective equipment
specified.
Substances that can be easily ignited and are flammable
Chemical substances required for the setup, operation and maintenance of machines may
be flammable. Burns and other damage to health and material may result.
● Read the information in these operating instructions and the product information supplied
by the manufacturer.
● Observe the relevant safety regulations and wear the personal protective equipment
specified.
86
Standard motors SH 63 ... 355
Operating Instructions, 12/2018, A5E38483075A
Advertisement
Table of Contents
