SMC Networks ITV10*0-CC****-Q Series Installation And Maintenance Manual page 2

ITV2-CC-TFM133
8 Installation & Maintenance
• This product is pre-set at the factory and must not be dismantled by the
user. Contact your local SMC office for advice.
• Ensure, when installing this product, that it is kept clear of power lines to
avoid noise interference.
• Ensure that load surge protection is fitted when inductive loads are
present (i.e. solenoid, relay etc.).
• Ensure precautions are in place if the product is used in a 'free flow
output 'condition. Air will continue to flow continuously.
• Do not use a lubricator on the input side of this product. If lubrication is
necessary, place the lubricator on the 'output' side.
• Ensure all air is exhausted from the product before maintenance.
• Length of connector cable shall be 10 m maximum.
9 Contacts
AUSTRIA (43) 2262 62280 NETHERLANDS (31) 20 531 8888
BELGIUM (32) 3 355 1464 NORWAY (47) 67 12 90 20
CZECH REP. (420) 541 424 611 POLAND (48) 22 211 9600
DENMARK (45) 7025 2900 PORTUGAL (351) 21 471 1880
FINLAND (358) 207 513513 SLOVAKIA (421) 2 444 56725
FRANCE (33) 1 6476 1000 SLOVENIA (386) 73 885 412
GERMANY (49) 6103 4020 SPAIN (34) 945 184 100
GREECE (30) 210 271 7265 SWEDEN (46) 8 603 1200
HUNGARY (36) 23 511 390 SWITZERLAND (41) 52 396 3131
IRELAND (353) 1 403 9000 UNITED KINGDOM (44) 1908 563888
ITALY (39) 02 92711
URL : http// www.smcworld.com (Global) http// www.smceu.com (Europe)
Specifications are subject to change without prior notice from the manufacturer.
© 2009 SMC Corporation All Rights Reserved.