Mitsubishi Lossnay LGH-150RVXT-E Handbook page 36

2 Check that LED4 on the control circuit board is OFF.
3 Unscrew the screws (eight PTT screws 4×8, indicated by
) for the maintenance cover (for the motors) on the bot-
tom side of the main unit.
4 Open the maintenance cover (for the motors).
5 Unscrew the screws (three PTT screws 4×8, indicated by
) to remove the connector cover.
Maintenance cover (for the motors)
Maintenance cover (for the motors)
─ 36 ─
LED 4
Control circuit board
Connector cover