Mira Orbis Installation And User Manual page 24

LCD Indications
The table below shows what is shown on the LCD display once the shower has
been installed and is in use.
Product State
Off
Standby
Product turned on
via Start/Stop button
Switching Power
Product turned off
via - on/off button
Low Flow
Temp Limit
LCD Display
Blank
Clock shown
including second
indicators
Clock Shown
including second
indicators
Will display
temperature after a
few seconds
Clock shown
including second
indicators
Will display
temperature after a
few seconds
Clock shown
including second
indicators
Clock shown
including second
indicators
Low Flow graphic
displayed
Clock shown
including second
graphics
Temp Limit graphic
displayed
Backlight
Off
Dim
Full Brightness
Full Brightness
Fade to Dim
Backlight flashes
Backlight flashes
24
Comments
Product turned off at
pull cord
On initial start up
unit will turn onto
low power. The next
time you turn the
unit on it will be at
the previous setting
Flow will change
accordingly
Product will stop
heating the water,
flow will reduce.
Product will stop
heating for 10
seconds and then
restart.
- turn the
temperature control
down.