Required Minimum Space For Installation And Service - Sanyo Mini ECO-i 85464359981002 Installation Instructions Manual

I Concealed Duct High-Static Pressure Type (D Type)
3-19. Required Minimum Space
for Installation and Service
G
This air conditioner is usually installed above the ceiling
so that the indoor unit and ducts are not visible. Only the
air intake and air outlet ports are visible from below.
G
The minimum space for installation and service is shown
in Fig. 3-77.
It is recommended that space be provided (23-5/8" ×
G
23-5/8") for checking and servicing the electrical system.
G
Fig. 3-78 and Table 3-5 show the detailed dimensions of
the indoor unit.
D
Table 3-5
Length
A
Type
36 16-17/32
48 17-23/32
Unit: in.
B C
15-35/64 2-43/64
16-47/64 3-55/64
16 - ø1/8
(Hole for full
circumference)
19/32 38-37/64 (Suspension bolt pitch)
24-13/32
19-11/16 2-3/4
1-3/8
25/64 25/64
38-37/64
Suspension
bolt pitch
Inspection access
(23-5/8" × 23-5/8")
Drain pan
Ceiling face
37
31-7/32
7 × 3-15/16 = 27-9/16
22 - ø1/8
2-5/32 25/32
(Hole for full
3-35/64
1-37/64
circumference)
2-23/64
1-57/64
Electrical component box
4-ø25/32 hole for
1-13/16
suspension bolt
4 × 3-15/16
= 15-3/4
19-11/16
19/32
39-49/64
37 1-3/8
Fig. 3-78
44
Min. 23-5/8
19-11/16 (Space for service)
5-1/8
11-27/64
37
Suspension
bolt pitch
Air suction side
Refrigerant tubing
Electrical
component
Min. 23-5/8
box
Space for
service
Min. 22-53/64
Min. 5-1/8
Fig. 3-77
Refrigerant liquid line (ø3/8 or ø1/4)
Refrigerant gas line (ø3/4 or ø5/8)
Power supply outlet
Drain connection (25A, O.D. 1-1/4")
Duct connection for suction
Duct connection for discharge
Inter-unit control wiring
Drain pan
Unit: in.
Unit: in.