Operation Without The Remote Control Unit; Care And Cleaning - Sanyo SAP-K71GJA Technical & Service Manual

INDOOR UNIT
Operation
selector
Casing and Grille
(Indoor Unit)
20
Operation without the Remote
Control Unit
If you have lost the remote control unit or it is not working properly, follow the
steps below.
1. When the air conditioner is not running
If you want to turn on the air conditioner, switch the operation selector to the
OFF position, and then to the ON position.
The temperature setting and fan speed are automatically set to
NOTE
match the settings before operation last stopped, provided that
operation last stopped less than four hours previously. However, if
operation last stopped more than four hours previously, the unit
switches to the auto operation mode.
2. When the air conditioner is running
If you want to turn off the air conditioner, switch the operation selector to the
OFF position.

Care and Cleaning

1. For safety, be sure to turn the air conditioner off and also to
disconnect the power before cleaning.
2. Do not pour water on the unit to clean it. This will damage the
internal components and cause an electric shock hazard.
Clean the casing and grille of the indoor unit with a vacuum cleaner brush, or
wipe them with a clean, soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out of
place.
1. Never use solvents, or harsh chemicals when cleaning the indoor
unit. Do not wipe the plastic casing using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if
handled improperly; be especially careful when you clean these
parts.
3. The internal coil and other components of the outdoor unit must be
cleaned every year. Consult your dealer or service center.
: http://splitoff.ru/tehn-doc.html
OI-378-20EG