Settings Dialog And Submenus - Simrad MX610 Operator And Installation Manual

Settings dialog and submenus

The system is configured and most system settings defined during installation and commis-
sioning of the system.
The settings parameters are logically grouped, and each group is presented with an icon in the
Settings page. This page is accessed by pressing the MENU key, highlight the Tools & Settings
then press the knob (or ENT). A settings menu map is shown below:
AIS
SETTINGS
ALARMS
GPS
NAVIGATION
NETWORK
SYSTEM
TRACKS
UNITS
AIS settings
Alarms settings
Menu overview | MX610/MX612 Operator and Installation Manual
www.busse-yachtshop.de | info@busse-yachtshop.de
MMSI
ICON FILTER
DANGEROUS VESSELS
SETTINGS
SIREN ENABLED
ENABLE RAIM
RAIM ALARM
RAIM PROTECTION RADIUS
LAT OFFSET
LONG OFFSET
METHOD
ARRIVAL RADIUS
XTE LIMIT
ARRIVAL LIMIT
COORDINATE SYSTEM
DATUM
MAGNETIC VAR
SOURCES
DEVICE LIST
DIAGNOSTIC
SIMNET GROUPS
DAMPING
NMEA 2000
LANGUAGE
TEXT SIZE
KEY BEEPS
TIME
RESTORE DEFAULTS
SIMULATOR
ABOUT
DISTANCE
DISTANCE SMALL
SPEED
WIND SPEED
DEPTH
HEADING
LOGGING TYPE
DISTANCE
TIME PERIOD
TRUE/MAGNETIC
Used to enter the MMSI number of the vessel, set the icon filters
to show or hide vessel targets and set limits for dangerous
vessels based on distance or time of closest point of approach
(CPA).
This screen is used to manage and control the alarm
feature. Press the PAGE key to change tabs
-Settings tab is used to turn on/off alarms and set
limits.
-History tab lists all previous alarms.
-Active tab shows alarms that are still active. The
alarm is removed from the list when the cause is
corrected.
| 17