Powering Off The Projector - Acer U5530 User Manual

Powering Off the Projector

1. Press the " " button on the remote control or on the
Control Panel to turn off the projector. The following
message will be displayed on the screen.
Press the " " button again to confirm otherwise the
message will disappear after 15 seconds. When you press
the " " button for the second time, the projector will shut
down.
2. The cooling fans continue to operate for about 10 seconds
for cooling cycle and the On/Standby LED will flash Blue.
When the On/Standby LED lights solid Red, the projector
has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press " " button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
Installation
Power Off?
Press Power again
13
English