10
English
Powering Off the Projector
u
1. Press the Power/Standby button to turn off the projector lamp.
2. After pressing the Power/Standby button, you will see a message Power off the
lamp? on the on-screen display. Press the Power/Standby button again to
confirm. Otherwise the message will disappear after 5 seconds.
3. Power/Standby LED indicator will flash amber for about 30 seconds.
4. Disconnect the power cord from the electrical outlet and the projector.
* When the LAMP indicator lights solid orange; please change the lamp
module immediately.
* When the TEMP indicator lights solid orange, it indicates the projector
has been overheated. The display will automatically shut itself down.
Under normal conditions, the display can be switched on again for your
presentation. If the problem persists, you should contact your local dealer or
our service center.
* No matter the video source is input or not, if you pressPower/Standby by
accident, a Power off the lamp ? sign will display in screen. You can clear
the turn-off message by pressing any function key. Or you can just ignore this
message without pressing any function key; the message will disappear after
5 seconds and restore to previous status.
Downloaded from ProjectorsManual.com Manuals