Download  Print this page

Using The Projector; Powering On / Off The Projector - Acer PL6610T User Manual

Hide thumbs

Advertisement

USING THE PROJECTOR

Powering on / off the projector

Powering on
1.
Remove the lens cap.
2.
Securely connect the power lead and signal/source cable. When connected, the Power LED will turn
red.
3.
Turn on the projector by pressing the
4.
A start up screen will display in approximately 10 seconds and the Power LED will turn blue.
otee:
The first time the projector is turned on, you will be prompted to select the preferred language, projection
orientation, and other settings.
Powering off
1.
Turn off the projector by pressing the
2.
The following message will be displayed:
3.
Press the
you press the
4.
When the Power turns solid red, this indicates the projector has entered standby mode. If you wish
to turn the projector back on, you must wait until the cooling cycle has finished and the projector has
entered standby mode. When the projector is in standby mode, simply press the
turn on the projector.
5.
Disconnect the power lead from the electrical outlet and the projector.
otee:
It is not recommended that the projector is turned on immediately, right after a power off procedure.
Lens cap
button again to confirm, otherwise the message will disappear after 10 seconds. When
button for the second time, the projector will shut down.
or
button on the projector keypad or remote control.
button on the projector keypad or remote control.
Power Off
Power Off?
Press power key again.
button again to
21
English

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Acer PL6610T