Recall Saved Settings - RGBlink M1 User Manual

3.10 Recall Saved Settings

M1 provides 20 positions for saving or recording parameters. To recall saved settings:
(1) Push the [LOAD] button in Presets operation area, the button [LOAD] and [PAGE] lights are lit,
and some of buttons 1~5 are lit and some are flashing. The button lit is ready for recall and
flash means just recall, push the button lit to recall.
->PAGE: 1
(2) Select PAGE, for example, the button [2] is lit, push the button [2].
->PAGE: 2
(3) After set the PAGE, it will jump to BANK option, or example, the button [2] is lit, push the
button [2]:
->BANK: 2
(4) Push the [LOAD] button again, the button light is off, and exit the load function.
M1
LOAD FROM
BANK: 1
LOAD FROM
BANK: 1
LOAD FROM
PAGE: 2
User Manual 44