Factory Reset; Pst Mode - RGBlink M1 User Manual

Users can custom Self or PST Freeze.

3.3.16 Factory Reset

Push [MENU] button, and enter the menu items. Turn the rotary knob, select [Factory Reset]
option in LCD screen, push the knob or touch the icon directly to confirm, and enter the
menu as follows:
Factory Reset
Factory Reset Factory Reset, Save IP
Users can select factory reset or not.

3.4 PST Mode

M1 supports 1 HDMI preview output, and it supports the functions as below:
3.4.1 Signal Selection
Push any button in Input Sources Area, for example, push the button [3], the border of signal 3
will turn to yellow, and the signal in PGM monitor will turn to signal 3.
3.4.2 Add or Delete Layer
Push any button of [A] to [B] in Layer Selection Area to add or delete the layer.
Add layer: The light is lit.
Select layer: The light is flashing.
Delete layer: The light is off.
3.4.3 Freeze the Layer
Push the [FREEZE] button in LCD screen, Select as needed to freeze layer A, layer B or 2 layers,
push the button<Live> , the layer is live.
Freeze
Live Freeze A Freeze B Freeze All
PGM Freeze On/Off
3.4.4 2 Layers Presets
(1) Push A or B button in Layer selection Area to select 1 or 2 layouts, including 1P, PIP.
M1 User Manual 31