RGBlink M1 User Manual page 10

Presets Operation Area
SAVE
Save all current settings supporting 20 savings.
LOAD
Load saving views from 1 to 20.
2
PAGE
PAGE button is used for save or load, total 5 pages, and 5 banks for each page.
1/2/3/4/5
The button is lit when select PAGE or BANK.
Input Sources Area
PGM Area
For indicating, user can not change the channel or set the size or position in PGM
area. Button turns to red when programming.
LOGO
Enable or disable the LOGO function. If select "ON", user can set the X and Y, or load
file from U Disk.
1/2/3/4/5/6/7/8/9/0
3
Each button is numbered and can be used as direct number. These buttons turn to
blue color when used as number key.
PST Area
For indicating, the button turns to yellow color when output the signal in PST channel.
For selecting, push any button to switch the PST signal.
For editing, button turns to yellow color -- the channel is used and can be edited;
button light is off -- the channel is not selected.
Menu and LCD Display Area
MENU
Menu and back/exit button.
SELECT/ENTER
4 Selection and confirmation button.
LCD Display
This displays current status of the product, and for feature selections providing
interactive choices in conjunction with buttons on the Rear Panel.
Switch Mode Area
CUT
Zero delay switching. PST can be switched to PGM seamlessly when push this button.
TAKE
5
Seamless switching with transition effects.
T-BAR
WIPE and mix switching.
M1 User Manual 9