Programming - Miele KMDA 7774 FL User Manual

Ceramic hobs with inductio
Table of Contents

Advertisement

You can adapt the programming of the
hob to your personal needs. Several
settings can be altered in succession.
After accessing programming mode,
the  symbol and  will appear in the
timer display. After a few seconds :
(programme 01) will flash alternately
with : (code) in the timer display.
Change programming
Accessing programming mode
The  sensor is located approx.
1 cm (index finger width) to the left of
the  sensor.
 With the hob switched off, touch
the  and  sensors at the same
time until the  symbol and  ap-
pear in the timer display.
Setting a programme
For a two digit programme number
you need to first set the tens position.
 Whilst the programme is visible in the
display (e.g. :), touch
the  sensor repeatedly until the
number for the programme you want
appears in the display or touch the
appropriate number on the numerical
keybank.
Setting the code
 Whilst the code is visible in the dis-
play (e.g. :), touch the  sensor
repeatedly until the number for the
code you want appears in the display
or touch the appropriate number on
the numerical keybank.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
To save the settings
 While the programme is showing in
the display (e. g. :) touch the 
sensor until the indicators go out.
To avoid saving the settings
 While the programme is showing in
the display (e. g. :) touch the 
sensor until the indicators go out.

Programming

45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmda 7774 fr

Table of Contents