Miele KMDA 7774 FL User Manual page 9

Warning and Safety instructions
Technical safety

Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a Miele authorised technician.

Do not use a damaged appliance. It could be dangerous. Check
the hob for visible signs of damage.

Reliable and safe operation of this hob can only be assured if it
has been connected to the mains electricity supply.

The hob must not be connected to the inverter of an autonomous
power supply such as e.g. a solar power system. When the hob is
switched on, power surges could result in a safety switch-off. This
could damage the electronic module.

The electrical safety of this hob can only be guaranteed when cor-
rectly earthed. It is essential that this standard safety requirement is
met. If in any doubt please have the electrical installation tested by a
qualified electrician.

To avoid the risk of damage to the hob, make sure that the con-
nection data on the data plate (voltage and frequency) match the
mains electricity supply before connecting it to the mains.
Consult a qualified electrician if in doubt.

Do not connect the hob to the mains electrical supply by a multi-
socket adapter or extension lead. These are a fire hazard and do not
guarantee the required safety of the appliance.

For safety reasons, this hob may only be used after it has been
built in.

This hob must not be used in a non-stationary location (e.g. on a
ship).
8
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.