Zipper Mowers ZI-STE2000IV Operation Manual page 24

Intelligent fuel-saving valve
Function:
When the engine is disconnected from the
electrical equipment, the velocity of the gene-
rator will slow down automatically. When the
equipment is connected, the electric charge
will make the generator return to a proper
rotate speed. This installation is used to re-
duce the fuel consumption during the running
process.
On the position OFF:
It means the intelligent fuel-saving system is
closed, and the rotate speed of the generator
is kept on a level higher than the standard
rotate speed.
2.2 SECURITY
To ensure safe operation matters
Z.I.P.P.E.R Maschinen Austria  www.Zipper-maschinen.at
If you operate the ZI-STE2000IV generator according to the guide, the
generator will run safely. Please read and understand the guide with
out fail before you use it, or else casualties or damage of the equip
ment will be caused by incorrect operation.
The exhaust contains toxic CO. Do not run the generator in dead-air
space. Make sure to provide enough air.
The fuel is very easy to burn or explode under specific conditions. Turn
off the engine before filling.
When filling the engine, keep away from cigarettes or spark. Please fill
in a draught.
Clean the overflowed fuel immediately.
Each time before you start the engine, you must do check it first,
avoiding accidents or damage of the equipment.
The generator must be run at a place at least one meter away from the
buildings or other equipments.
The generator must be run on a horizontal surface. If it leans, the fuel
would spill out.
You must master the knowledge of how to turn off the generator
quickly, and know all the operations of controlling the components. Do
never operate the engine without correct instructions.
Children and pets must be kept away from the operating area.
When the engine is running, everyone must keep away from the
circumvolving parts.
The generator is a latent danger if it is incorrectly operated, so do not
operate it by hand.
Do not operate the generator in the rain or in the snow, preventing
wetting it.
When the electrical equipment
needs disconnecting from the elec-
tric power, the intelligent fuel-
saving system can not run effec-
tively.
When the generator is connected with a
high electric charge, turn off the intelli-
gent fuel-saving valve to minimize the
change of middle pressure.
When using the DC output, please
turn off the intelligent fuel-saving
valve. (Fig. C)
strana 24