Maintenance Schedule - Westinghouse WGen6000 User Manual

MAINTENANCE

MAINTENANCE SCHEDULE

Failure to perform periodic maintenance
or not following maintenance procedures
can cause the generator to malfunction
and could result in death or serious injury.
Periodic maintenance intervals vary depending on
generator operating conditions. Operating the generator
under severe conditions, such as sustained high-
load, high-temperature, or unusually wet or dusty
environments, will require more frequent periodic
maintenance. The intervals listed in the maintenance
schedule should be treated only as a general guideline.
TABLE 1: MAINTENANCE SCHEDULE - OWNER PERFORMED
Maintenance Item
Engine Oil
Cooling Features
Air Filter
Spark Plug
Spark Arrestor
*Service more frequently if operating in dry and dusty conditions
TABLE 2: MAINTENANCE SCHEDULE - AUTHORIZED WESTINGHOUSE
SERVICE DEALER PERFORMED
Maintenance Item
Valve Clearance
Fuel Filter
22 | Westinghouse Portable Power
WARNING
NOTICE
After First 20
Before Every Hours or First
Use Month of Use
Check Level
Check/Clean
Check
-
-
After First 20
Before Every Hours or First
Use Month of Use
-
-
Following the maintenance schedule is important
to keep the generator in good operating condition.
The following is a summary of maintenance items by
periodic maintenance intervals.
After 50 Hours
of Use or Every
6 Months
Change Change
- -
- Clean*
- -
- -
After 50 Hours
of Use or Every
6 Months
- -
- -
CAUTION
Avoid skin contact with engine
oil or gasoline. Prolonged
skin contact with engine oil
or gasoline can be harmful.
Frequent and prolonged contact
with engine oil may cause
skin cancer. Take protective
measures and wear protective
clothing and equipment. Wash
all exposed skin with soap and
water.
After 100 Hour
of Use or Every After 300 Hours of
6 Months Use or Every Year
-
-
-
Check/Clean
Check/Clean
After 100 Hour
of Use or Every After 300 Hours of
6 Months Use or Every Year
- Check/Adjust
Check/Clean
-
-
Replace
Replace
-
-