Table of Contents
Advertisement
6
Quick start guide
Follow this procedure:
1. Charge the battery. You can do this in two different ways:
• Charge the battery using a USB cable connected to the power supply.
• Charge the battery using a USB cable connected to a computer.
Note Charging the camera using a USB cable connected to a computer takes
considerably longer than using the FLIR power supply or the FLIR stand-alone bat-
tery charger.
2. Push and hold the
button for more than 2 seconds to turn on the camera.
3. Aim the camera toward an area or object of interest and view the thermal image. The
relative temperature is represented by color, hot to cold (light to dark, respectively).
The infrared thermometer reading (upper left on the screen) represents the tempera-
ture at the position of the crosshair.
4. Pull and hold the trigger. This activates the two laser pointers.
5. Release the trigger to freeze/capture the image. Push the
age or push the
button to discard the image.
#T559974; r.33562/33594; en-US
button to save the im-
9
Hide quick links:
Advertisement
Table of Contents
