Graco Reactor H-VR Repair And Parts Manual page 47

Supplier
Citgo
Amsoil
BP Oil International
Carl Bechem GmbH
Castrol
Chevron
Exxon
Mobil
Shell
Texaco
* Note: Do not mix mineral-based and synthetic hydraulic oils. Completely drain oil from reservoir and pump prior to
converting between oils.
If the approved oils are not available in your area, use an alternative hydraulic oil meeting the following require-
ments:
Oil Type:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Anti-Wear (AW) Hydraulic
ISO Grade: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Viscosity, cSt at 40°C: . . . . . . . . . . . . . . . . . . . . .43.0-47.0
Viscosity, cSt at 100°C: . . . . . . . . . . . . . . . . . . . .6.5-9.0
Viscosity Index: . . . . . . . . . . . . . . . . . . . . . . . . . .95 or higher
Pour Point, ASTM D 97:. . . . . . . . . . . . . . . . . . . .-15°F (-26°C) or lower
Other essential properties: . . . . . . . . . . . . . . . . . .Formulated for anti-wear, anti-foaming, oxidation stability,
313540L
Table 9: Approved Anti-Wear (AW) Hydraulic Oils
Name
A/W ISO Grade 46
AWI ISO Grade 46 (synthetic*)
Energol
Staroil HVI 46
Hyspin AWS 46
Rykon
Humble Hydraulic H, ISO Grade 46
Mobil DTE 25, ISO Grade 46
Shell Tellus, ISO Grade 46
Texaco AW Hydraulic, ISO Grade 46
corrosion protection, and water separation
®
HLP-HM, ISO Grade 46
®
AW, ISO 46
Repair
47