Troubleshooting - Fisher & Paykel OR90SDG6 User Manual

Troubleshooting chart
If there is a problem, check the chart below to see if you can fix it. If the problem cannot
be fixed or persists, call your Authorised Repairer or Customer Care.
PROBLEM
GENERAL
The oven does not work.
The oven does not work
but the display is lit.
One or all of the lights
do not come on, but the
oven works.
The temperature
indicator is blank and
the oven control dials
are unresponsive.
The oven is not heating.
A glass pane in the oven
door has cracked,
chipped, or shattered.
68

TROUBLESHOOTING

POSSIBLE CAUSES
No power.
The clock has not been set.
The oven is set for automatic
cooking.
The oven is in Demo Mode.
The oven light bulb(s) have
blown.
The door is not correctly fitted.
The oven is in Sabbath setting
and the 'Light off' option has
been saved.
The control panel is locked.
The door is not properly closed
or it is opened too frequently
during cooking.
Incorrect cleaning or the edge
of the glass hitting against
something.
WHAT TO DO
Check that the mains power
supply (wall switch) is turned
on, the fuse has not tripped
and there is no power outage
in your area.
The oven will not work unless
the clock is set. See 'Setting
the clock'.
See 'Automatic cooking' for
instructions.
Contact Customer Care.
Replace the light bulb(s). See
'Care and cleaning' for
instructions.
See 'Care and cleaning' for
instructions on fitting the
door correctly.
To quit Sabbath setting,
press and hold CANCEL. See
'User preference settings' for
instructions on changing the
'Light off' option.
See 'Locking the oven
controls' for instructions.
The heating elements are
disabled while the door is
open.
Make sure the door is
properly closed and avoid
opening it frequently during
cooking.
You must NOT use the oven.
Call your Authorised Repairer
or Customer Care.