1
3
OR90 models - cooktop
Burner Controls
The dials control the flow of gas through the valve.
Using the single burners
1 Identify the dial of the burner you want
to use.
2 Starting from the O (OFF) position,
push the dial in and turn it anticlockwise
to HI.
The ignitor on the burner will spark.
3 After the burner has lit keep the dial
held in for a few more seconds before
releasing.
Releasing the dial too soon will
extinguish the flame.
46
USING YOUR GAS COOKTOP
2
1
3
1 Semi-rapid burner
2 Dual wok burner
3 Triple-ring wok burner
Using the dual burner
1 Starting from the O (OFF) position,
push the dial in and turn it anticlockwise
to either HI
to light both the inner
and outer rings or HI
inner ring only.
to light the