Memory Card Reader Board - HP 15-BQ0 Series Maintenance And Service Manual

Memory card reader board

NOTE: The memory card reader board includes the memory card reader slot. The memory card reader board
spare part kit does not include the memory card reader board cable. The memory card reader board cable is
available using spare part number 924325-001.
Description
For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx
For use only on computer models with model numbers 15m-bq0xx and 15-bq0xx
Before removing the memory card reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the memory card reader board:
1. Remove the two Phillips PM2.0×3.3 screws (1) that secure the memory card reader board to
the keyboard/top cover.
2. Remove the memory card reader board (2).
Reverse this procedure to install the memory card reader board.
48 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 31).
System board on page
29).
42).
Spare part number
L01917-001
924336-001