Card Reader Board - HP Spectre x360 Maintenance And Service Manual

Card reader board

Card reader board and cable spare part kits include replacement rubber feet.
Description
Card reader board
Card reader board cable
IMPORTANT:
Before removing the card reader board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the left speaker (see
Remove the card reader board:
1. Remove the Phillips M2.0×2.5 screw (1) that secures the card reader board to the computer.
2. Lift and position the card reader board so you can access the connector underneath (2).
3. Disconnect the cable from the ZIF connector on the bottom of the card reader board (3).
You must remove the battery and left speaker to remove the card reader board.
Bottom cover on page
Battery on page
Speakers on page
22).
23).
33).
Spare part number
913005-001
912991-001
Card reader board 45