Solid-State Drive - HP 15-BQ0 Series Maintenance And Service Manual

Solid-state drive

Description
For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx:
512-GB, 2280 PCIe, SS, NVMe
256-GB, 2280 PCIe, SS, NVMe
For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx:
1-TB, 2280 M.2, PCIe3×4, SS, NVMe with TLC
512-GB, 2280 M.2, PCIe3×4, SS, NVMe with TLC
360-GB, 2280 M.2, PCIe3×4, SS, NVMe with TLC
256-GB, 2280 M.2, PCIe3×4, SS, NVMe with TLC
256-GB, 2280 M.2, SATA-3, with TLC
128-GB, 2280 M.2, SATA-3
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips PM2.0×2.4 broad head screw (1) that secures the solid-state drive to
the system board.
34 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 31).
29).
Spare part number
L01301-002
L01300-002
908359-003
847110-015
917818-002
847109-018
759848-028
827560-038