Hard Drive - HP 15-BQ0 Series Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard
drive bracket is available using spare part number 924350-001. The hard drive cable is available using spare
part number 924326-001.
Description
1-TB, 7200-rpm, SATA, 9.5-mm hard drive
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the hard drive:
1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
2. Use the tab built into the hard drive rubber sleeve to remove the hard drive (2).
32 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 31).
29).
Spare part number
766457-857